|
|
 |
|
DODGE
Conveyor Components
Engineered Drum Pulley Assemblies
|
| |
|
 |
Description |
Made
to order based upon conveyor load, belt tension, belt
wrap angles and bearing centers supplied for belt
ratings up to and exceeding 8,000 PIW (Pounds per
Inch of Belt Width) or 1,400 kN/m.
|
|
Features/Benefits |
Welded,
integral and "T" Section Super hub versions that minimize
the deleterious effects of welding heat affected zones
(HAZ). HE (High Endurance) 14 degree taper bushings
with the lowest bellows installation stress of any
taper bushing shaft mounting system for 2 hub pulley
applications up to 12" diameter and B-Loc keyless
locking devices for shafts to 30" diameter. Full 360
degree fillet welding of internal support discs when
used.
|
|
Sizes
/ Housing Styles Available |
|
Installation
Resume Chart
|
| |
|
|
|
Key
Industries / Applications |
- Head,
snub, bend and take-up pulleys on bulk belt
conveyors used in metallic mining, stone, clay,
glass, cement, coal mining and preparation plants,
coal fired electric generating plants, transportation
ports and terminals, solid waste, concrete and
wood recycling plants, iron and steel mills,
and iron foundries.
|
|
|
|
Complementary
Dodge Products |
- Couplings
- Pillow
block bearings
- Take-up
frames
- Gear
reducers
- Electric
motors
|
|
| |
|
|
|
Accessories
Available |
Up
to 2" of vulcanized 45, 60, 70 durometer SBR
and 45, 60, 70 DR neoprene rubber lagging with
plain and grooved surfaces; vulcanized 60 durometer
DLag with +70% more wear resistance than 60
durometer SBR; cold bonded 60 durometer REMA
Tip Top rubber lagging with imbedded ceramic
and weld-on strip Holtz 60 durometer SBR rubber
slide lagging.
|
|
|
|
Modifications
Available |
- Shafts
with turn downs, key ways, holes drilled and
tapped supplied with nonwater soluble rust inhibitor
-
Mounting of shafts to pulley hubs, bearings
and coupling halves mounted to shafts
- Drums
center crowned or straight faced
- Spiral
rods or bars welded to drums
-
Turned rim outside diameters to .015 TIR, post
weld thermal stress relieving, static balancing
to ISO Standard 1940/1-1986 (Grade G-40), dynamic
balancing, magnetic particle and ultra sound
weld testing, and line boring of end disc inside
diameters
-
Permanently fastened metal tags with unique
identification numbers and date of manufacture
- Certified,
reproducable drawings furnished
|
|
 |
 |
|
|
|
|
