V-Groove sheaves and matching V-Belts used to transmit rotating mechanical power between two shafts on medium to high speed applications.

Economical cost per HP transmitted. Shock load and vibration isolation. Clean, quiet operation. Capable of up to 1/2 deg misalignment.

Stock drive selections covering 1 HP to over 1000 HP application range. 25,000 hours average life with proper selection, installation and maintenance. Speed reduction or speed increase ratios of 1:1 to over 6:1 available. Manufactured to MPTA (Mechanical Power Transmission Association) industry standards. 92% to 95% drive efficiency is typical.

Sheaves

• Classical and wedge style groove profiles
• Stock sizes from one to twelve grooves, 1.5" to 71" in diameter
• Available in QD and Taper-Lock bushed or finished bore
• Made to order designs also available

  (See the V-Drives section of the DODGE PT Components Catalog for more detailed information)

V-Belts

• Classical A-B-C-D or Narrow 3V-5V-8V single belts, Polyband multiple-strand belts, lengths from 22" to 660"
• Belts are available in standard or cogged versions, double V (hex) belts, and are made of neoprene rubber with polyester cord and conform to RMA standards

  (See the V-Drives section of the DODGE PT Components Catalog for more detailed information)